TidyTrack has had QR clock-in for a while: a cleaner scans any area poster at a site, taps Clock in, and taps Clock out at the end. That covered the basics, but we kept hearing the same three questions from cleaning companies and facilities teams:

  1. Can I put a clock-in code by the door instead of making people clock in from a washroom?
  2. Somebody forgot to clock in. How do I fix their hours?
  3. Can I see how long the cleaning actually takes, not just how long people were on site?

This release answers all three, and adds a timesheet you can hand to payroll.

Time-clock QR codes that aren’t tied to an area

Every site can now have its own time clocks: QR codes for clocking in and out that belong to the site, not to anything that needs cleaning. Put one by the staff entrance, the loading dock or the janitor’s closet.

Scanning a time clock opens a short page with the site name, the clock’s name (“Staff entrance”) and two buttons: Clock in and Clock out. There’s no checklist and no “last cleaned” record, because there’s nothing to clean.

A few details that matter in practice:

  • Area posters still work. A cleaner can clock in at the door and clock out from the last washroom on their route, or the other way round. It’s one shift either way.
  • Same identity rules as the rest of TidyTrack. A phone is identified once with the cleaner’s 6-digit code (or an emailed code, if your workspace requires verification), and is remembered after that. If your workspace doesn’t allow free-text names, nobody can clock in as “Bob”.
  • Replace a code in one click. If a poster gets photographed and shared, replace it from the site page. The old code stops working immediately.
  • Up to ten per site, and they don’t count toward your plan’s area limit.

To set one up, open a site in the dashboard, find Time clocks, type a name and click Add time clock. Click the QR code to download it for printing.

Timesheets you can fix and hand to payroll

Shift tracking is only useful if the hours are right, and real life has missed clock-ins, dead phones and the occasional paper sheet.

Add a shift by hand. On the Shifts page, admins can now click Add shift, pick the site and the cleaner, and enter the times. TidyTrack refuses a shift that overlaps another one for the same person, links any cleans that cleaner logged during that window, and marks the shift as manual everywhere it appears. Every manual entry, correction and deletion is recorded in the audit log, so you can always see who changed the hours and when.

Delete a mistake. A duplicate or a test clock-in can be deleted from the shift’s correction dialog. Any cleaning logs made during it stay where they are.

A per-day timesheet. The new Timesheet CSV export on the Shifts page rolls every shift up to one row per cleaner, per site, per day:

ColumnWhat it holds
dateThe day the shift started, in the site’s timezone
site, timezoneWhere it was worked
cleaner, memberIdWho worked it, with a stable id for matching
shiftsHow many shifts that day
firstClockInAt, lastClockOutAtFirst in and last out, as unix timestamps
minutes, hoursTotal time, with hours to two decimals
autoClosedShifts, editedShifts, manualShiftsHow many of those shifts were closed automatically, corrected, or entered by hand

The last three columns are there so whoever runs payroll can see at a glance which rows a person touched, and which were closed automatically because someone forgot to clock out. You still have the per-shift Shifts CSV when you need every punch.

How fast does the cleaning actually go?

Hours on site tell you what you paid for. They don’t tell you what you got. So the QR page now notes the moment a cleaner opens an area’s checklist, and the log records how long it was until they submitted it. That gives every clean a duration, and the Shifts page a new Cleaning pace report:

  • Median and average clean time per cleaner. Useful for spotting who needs help, and who should be training others.
  • Median and average clean time per area. The fastest way to check whether the time you bid for a washroom matches what it really takes. Pair it with our production rates guide when you price the next contract.
  • Cleans per shift hour. How many logged cleans fit into an hour on the clock, per cleaner and overall.

One honest caveat: some cleaners scan the poster after finishing the area. Those cleans take a few seconds from scan to submit, which would drag every average down. TidyTrack treats anything logged within a minute of opening as untimed and leaves it out of the averages, and the report shows how many cleans were timed out of the total so you know how much to trust the numbers.

Use it as is, or with the tools you already have

On its own, TidyTrack now covers the whole loop for most small and mid-sized cleaning operations: clock in at the door, log each area, clock out, review hours against each site’s weekly budget, correct anything that’s off, and export the week for payroll. If a site has an expected start time, you’ll also get an alert when nobody has clocked in, and shifts left open are closed automatically after the site’s maximum shift length and flagged for review.

Alongside a payroll or HR tool, the timesheet CSV is the bridge today. It’s plain CSV with one row per person per day, which almost every payroll, accounting and scheduling tool can import. Match people on memberId or name, and use hours.

Coming soon: integrations. We’re working on two things next:

  • Importing timesheets, so teams moving off paper or another time clock can bring their history with them and see it in the same reports.
  • Direct exports to payroll and workforce platforms, so approved hours flow out without a spreadsheet in the middle.

If there’s a specific payroll, accounting or scheduling tool you need us to connect to, tell us which one. It directly shapes what we build first.

Where to find it

  • Time clocks: open a site in the dashboard and scroll to Time clocks.
  • Manual shifts, cleaning pace and the timesheet export: the Shifts page, available to admins and site managers. Adding, correcting and deleting shifts is for admins.
  • Clean timing: nothing to set up. It starts with the next clean logged from a QR code.

Clock-in, time clocks and the reports are on every plan, including Free. CSV exports come with paid plans. Read more on the clock-in feature page, or start with how QR cleaning logs work if you’re new to TidyTrack.